Sfa 089 Sanicube 1

$1,771.27

SKU: 103945
  • Great Prices
  • Fast Shipping
  • Hassle Free Returns 
  • Nationwide Delivery
  • Got a question? Call FREE on 1 (833) 237-4990

SaniCubic 1 can be retrofitted into an existing sewage ejector basin of at least 24 in. in diameter for a quick and easy pump exchange; as this is considered a “plug and play” device, no chains or floats are needed
Note that the effluent pipe leading into the pump has to be installed with the required 1/4 in. per foot gravity flow; there must be a 10 in. of height difference (from pump to connecting fixture) if the drain is connected to the bottom inlet
Wastewater from other sanitary fixtures is discharged into the SaniCubic 1 via four 1-1/2 in. or 4 in. inlets, on either side of the housing and on the top of the enclosure; the internal discharge pipe comes equipped with a check valve that prevents back flow into the unit; isolating valves (ball, gate valves) must be installed on waste inlets and on the discharge pipe to ensure that any service/maintenance may be carried out safely
Unit has been designed with a 1-1/2 in. vent connection on the top of the enclosure; all plumbing codes require connection to a vent system; please note that the vent system should be a 2-way air vent; the use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered 1-way air vent systems