Product Specifications:
- Universal permanent capacitor run motor manufactured to OEM performance and reliability requirements
- Every capacitor is fully inspected, including overrun testing at 700VAC voltage 60HZ for 1 minute, guaranteeing that it can be used in any potential condition
- Tested and certified by Underwriters Laboratories to UL810 CZDS2
- Internal modular construction ensures cooler running and more efficient heat dissipation
- Single post failure does not render the unit unusable, unlike single-wound, multi-tapped capacitors
- Constructed to the latest international environmental standards
- 12.5mfd combined total capacitance: 2.5/5.0/5.0mfd
- Voltage rating: 370vac or 440vac
- 50-60Hz
- Operating temperature range -40 °C to +70 °C
- Height: 3 inches
- Diameter: 1-3/4 inches
Jumpering Instructions:
- Check the capacitance required from the capacitors being replaced or from the technical manual
- Refer to this chart for the correct configuration
- Use jumper wires to make up the correct values
- Use the pen to record the values you have used in the boxes provided on the capacitor
- Secure the universal capacitor to the motor using original mountings or zip ties
- Connect the lead from the motor to the capacitors. The common (black) terminal can only be used for both motors
What’s Included
- 1 × Universal Capacitor Mini Motor Mate (MMINICAP20)
- Jumper leads/wires for configuration
- Marking pen
- Set up instructions/configuration guidance
For single and dual value capacitors, see the Mmunicap200
